Date: Sat, 29 Jul 89 09:55:06 edt Reply-To: PZS@mercury.mceo.dg.com From: Pete_Simpson@dgc.mceo.dg.com Subject: General coverage mod for YAESU FT-747GX CEO file contents: ------------------------------------------------------------------------------ General Coverage Mod for YAESU FT-747GX ------------------------------------------------------------------------------ 1) Remove top cover. 2) On backside of display unit, there is a brown jumper wire near the large ribbon cable. 3) Cut the brown jumper wire. 4) Turn the radio on and set the frequency to 12,345.6 KHz, then turn the radio off, then on again. 5) This enables the general coverage mode and a GEN display will come on and stay on at the top of the LCD display. 6) Reassemble the unit. It will now transmit everywhere it receives, however, Yaesu recommmends that it only transmit between 1.8 - 30 MHz. Disclaimer: I'm passing this on from someone who owns one of these and has done the mod. I have not done or tested this mod. You do it at your own risk. Copied from the QRZ! Windows Ham Radio CDROM